William Robert Cole
Engineers in Plainfield, IN
License number
Utah 148148-2202
Issued Date
Jan 1, 1910
Expiration Date
Apr 30, 1986
Category
Engineer/Land Surveyor
Type
Professional Engineer
Address
Address
Plainfield, IN
Professional information
Mobile Grave Excavator
US Patent:
2004017, Sep 9, 2004
Filed:
Jul 30, 2003
Appl. No.:
10/631383
Inventors:
William Cole - Plainfield IN, US
International Classification:
E02F005/16
US Classification:
037/300000
Abstract:
A mobile, steerable excavating machine primarily used for the digging of graves. In which, vertical cutting bar assemblies are mounted to a horizontal frame to allow digging of the earth downwardly and laterally within the frame of the machine while removing the earth from the hole on one side or the other into a haul able device. The wheels of the Mobile Grave Excavator are conventional pneumatic tires of a size to accommodate the ability for the floatation in soft ground. In addition all four (4) wheels are powered by a hydraulic motor mounted in the each of the hubs; the wheels are also steerable and are mounted on the frame with a hydraulic cylinder used for leveling. The cutting bar is mounted so its operation will work vertically as well as horizontally and is operated by a separate hydraulic motor removing the pulverized material. The full operation of this machine is hydraulically powered with an internal combustion engine. Moving this equipment over public highways would require transportation on a trailer or truck.
Bi-Powered Clutchless Variable Speed Transmission
US Patent:
2003023, Dec 18, 2003
Filed:
Jun 14, 2003
Appl. No.:
10/461570
Inventors:
William Cole - Plainfield IN, US
International Classification:
F16H003/72
US Classification:
475/007000
Abstract:
When motor is powered up and running the primary shaft is connected to the Planetary Gear assembly B, while motor is not running. The output shaft out of Planetary Gear assembly A is zero. As power goes through Planetary Gear assembly B and transfers the power through the bevel gear and then the worm gear on Planetary gear assembly A, which then rotates the ring gear at the appropriate speed to cause the Planetary Gears to remain stationary about the sun gear. Consequently no power is transferred to the output shaft. When motor is powered up, and as its speed increases it starts the rotation of the ring gear on Planetary Gear assembly B and causes the output shaft to reduce its speed and in turn this change in speed is transferred to the ring gear on Planetary Gear assembly A which now starts the rotation of the output shaft of assembly A.
Anti-Jackknifing Semi-Trailer Attachment
US Patent:
2005021, Sep 29, 2005
Filed:
May 10, 2005
Appl. No.:
11/125492
Inventors:
William Cole - Plainfield IN, US
International Classification:
B60T007/12
US Classification:
280432000
Abstract:
A system including an anti-jackknifing semi-trailer attachment assembly with a remote control on/off switch and hydraulic cylinder provides system control to a tractor and a trailer connected with a standard fifth-wheel connection, in which the system can be controlled by the driver to allow the moving vehicle to be adjusted to various road conditions in an act to prevent jackknifing
Bi-Powered Clutchless Variable Speed Transmission
US Patent:
2005020, Sep 22, 2005
Filed:
May 13, 2005
Appl. No.:
11/129010
Inventors:
William Cole - Plainfield IN, US
International Classification:
F16H003/72
US Classification:
475007000
Abstract:
When the primary power supply motor is powered up and running the primary shaft is connected to the Planetary Gear assembly , while motor is not running. The output shaft out of Planetary Gear assembly A is zero. As power goes through Planetary Gear assembly and transfers the power through the bevel gear and then the worm gear on Planetary gear assembly A, which then rotates the ring gear at the appropriate speed to cause the Planetary Gears to remain stationary about the sun gear. Consequently no power is transferred to the output shaft. When motor is powered up, and as its speed increases it starts the rotation of the ring gear on Planetary Gear assembly and causes the output shaft to reduce its speed and in turn this change in speed is transferred to the ring gear on Planetary Gear assembly A which now starts the rotation of the output shaft of assembly
Small Gun Glove Holster
US Patent:
2004009, May 27, 2004
Filed:
Nov 20, 2003
Appl. No.:
10/717779
Inventors:
William Cole - Plainfield IN, US
International Classification:
A41D019/00
US Classification:
002/160000
Abstract:
A small gun glove holster is designed for either the left or right hand to be worn while working, or to keep handy in a night stand. This allows the user to keep readily at ease the need of protection, and keep both of your hands free while operating in the dark for their protection.
Gear Box
US Patent:
2004011, Jun 24, 2004
Filed:
Nov 18, 2003
Appl. No.:
10/716255
Inventors:
William Cole - Plainfield IN, US
International Classification:
F16H001/02
US Classification:
074/41200R
Abstract:
A compact planetary drive provides a high reduction ratio and high torque capacity, that is economical to use.